Olidef cz produces wide neonatal, laboratory and medical-hospital support line.
BABY INCUBATOR
SCTI LINE 3
Temperature: Air Mode (Manual): The incubator automatically controls thetempe grammed value. Skin Mode (Servo- controlled) : The incubator automatically controls the heating levelthrough a skin sensor based on the operators programmed value for the desiredtemperature of the new- born. Humidity: - Passive Mode: The operator can increase the relative air humidity inside the incubator, using a water reservoir integrated to the equipment. Control Module Front Panel: Babys compartment Frontal intensive care door Portholes opening system X- Ray cassette Removable bed Reverse & High horizontal position Dimensions (Width x Length x Height) : 137 x 52 x 90cm Support with 4 wheels & brake
Transport Incubator
Incubator for hospital transport and withdrawal of newborns and high risk premature babies, with low weight and severe diseases. Microprocessed control system, with high degree of precision. Auto test of the alarms. Removable control panel with safety lock. Operation Mode Systems: Air Temperature Control (ATC) or Infant Temperature Control (ITC / Servo Controlled). Digital indication of Air, Newborn (NB) and desired temperatures. Main alarms: hot air, cold air, lack of energy (mains), lack of energy (battery), lack of circulation, overheating, failure in the system, discharged battery, polarity of the external power supply inverted, hypothermia, hyperthermia and disconnected NEWBORN (NB) sensor. Low internal noise level. Acrylic dome in double wall, four passages for tubes, hatch and frontal and lateral seals for access to the patient. High resistance injected plastic body, with no sharp edges, with smooth finish and atoxic epoxy painting, impeding the accumulation of filth. Removable and autoclavable oval gates. Oxygen limiting valve with microfilter. Incorporated humidification system. Two gelatinous rechargeable internal batteries, with autonomy for up to 4 hours. Steel support with rotating wheels of adjustable height (option in aluminum). Power supply: 127 / 220 V (with automatic selection) or 12 VDC. Support for drip. Cylinders for gases. Auxiliary lighting. Removable electronic module. Independent module for batteries, removable with incorporated charger. Removable independent module for battery and charger. Graphical indication for battery charge level. Safety belt for the patient. Possibility of lateral displacement of the newborn’s bed. Support for monitors. Aluminum tubular support. Lock system for fixing on vehicles.
SCTI LINE 4
Incubator for intensive cares.
Operation Mode Systems: Air Temperature Control (ATC) or Infant Temperature Control (ITC / Servo Controlled). Integrated servo controlled humidification system, with programming up to 95% of relative humidity of the air. Balance integrated to the bed with weight indication on the incubator’s control panel, allowing the obtainment of X-rays, without the need of patient withdrawal. Continuous inclination mechanical system of the bed. Support with rotating wheels for fixed or adjustable height. Drawer for placement of radiographic chassis. Alphanumeric display with simultaneous indication of the desired, air and patient temperatures, weight and relative humidity of the air. Product certified in accordance with the norms: NBR IEC 60601-1, NBR 60601-2-19, NBR 60601-1-2 and NBR 60601-2-49. Wide line of accessories.
Model 211
Incubator for intensive care. Acrylic dome with double wall. Operation Mode Systems: Air Temperature Control (ATC) or Infant Temperature Control (ITC / Servo Controlled). Integrated servo controlled humidification system, with programming up to 95% of relative humidity of the air. Balance integrated to the bed with weight indication on the incubator’s control panel, allowing obtainment of X-rays, without the need of patient withdrawal. Support with rotating wheels, for fixed or adjustable height. Drawer for placement of radiographic chassis. Alphanumeric display with simultaneous indication of the desired, AIR and patient temperatures, weight and relative humidity of the air. Product certified in accordance with the norms: NBR IEC 60601-1, NBR 60601-2-19 and NBR 60601-1-2. Wide line of accessories.
INFANT RADIAN WARMER
MATRIX SC
The neonatal infant radiant warmers model MATRIX SC, recommended for delivery rooms, nurseries & intensive care units, provide a warm & stable microenvironment for small babies, who need additional care in this critical period in the beginning of their lives. These are high- technology equipment which resources may include control systems of temperature, along with factors such as: quality, effectiveness & user- friendly operation, all specially designed to fully meet the user’s expectations, therefore providing greater comfort for the small patients.
MATRIX R
Heated crib with servo control and radiant heat system. Removable acrylic bassinet. Microprocessed electronic control system. Incorporated Apgar clock. Manual and automatic operation modes (servo control). Rotating heater (180º) to facilitate x-ray procedures. Reduced dimensions. Bed inclination adjustment. It allows the use of reverse phototherapy (possible with removable acrylic bassinet).
MATRIX RB
Heated crib with servo control and radiant heat system.
Microprocessed electronic control system.
Incorporated Apgar clock.
Flat Bassinet, with Acrylic foldable sides, activated with just one hand.
Drawer for instruments.
Reduced dimensions.
MATRIX RS
MATRIX RS
Heated crib with servo control and radiant heat system.
Microprocessed electronic control system.
Incorporated Apgar clock.
Flat Bassinet, with Acrylic foldable sides, activated with just one hand.
Drawer for instruments.
Reduced dimensions.
PHOTOTHERAPY
MEDPHOTO 6
It uses six or eight fluorescent bulbs for the treatment of neonatal hyperbilirubinemia.
It presents practicality in use, allowing angular and height adjustments.
It allows the use in Infant Warmers, incubators and common cribs.
Equipped with forced exhaust system.
Acrylic protective lens for mechanical protection and block of ultraviolet and infrared radiation, with transparent mattress.
It allows the execution of reverse phototherapy.
MAXIPHOTO 8
It uses six or eight fluorescent bulbs for the treatment of neonatal hyperbilirubinemia.
It presents practicality in use, allowing angular and height adjustments.
It allows the use in Infant Warmers, incubators and common cribs.
Equipped with forced exhaust system.
Acrylic protective lens for mechanical protection and block of ultraviolet and infrared radiation, with transparent mattress.
HALOGEN MAXIPHOTO
Compact phototherapy for the treatment of neonatal hyperbilirubinemia.
It uses halogen dichroic bulb.
Simplified focus adjustment system.
Incorporated ultraviolet and infrared filter system.
Low energy consumption.
Baseless option for use in Olidef Infant Warmers.
Easily removable protective lens, allowing the cleaning of filter system.
ASPIRATOR AC 45
Aspirator / Compressor AC 45
Aspirator compressor for medical, dental and laboratory use, with totally oil free and low noise level mechanism. Independent adjustments for compressed air and vacuum. Support with up to two collector bottles. Graduated vacuometer up to 30 in Hg. Functioning by diaphragm system. Handle for transport. Removable bottle cap, with anti-overflow safety valve. High durability motor ideal for use in hospitals, clinics and medical offices. Transparent and autoclavable glass or polycarbonate (unbreakable) collector bottles. Pedal for continuous / intermittent activation. Electronic system for alarm and automatic disconnection for full bottle. Bacteriological microfilter.